OM642 - Intake Manifold Runner Connecting Rods - Mercedes Diesel 3.0L V6 Repair

Description

The repair kit for the swirls of the vortex dampers of the Mercedes intake manifold with the OM 642 diesel engine, the kit is provided immediately for 2 collectors - left and right.
The original numbers of the intake manifolds A6420905037, A6420907737, A6420903237, A6420905437.
One of the faults of the OM 642M diesel engine is the defective intake manifold flaps, they stop working due to the wear of the chuck fixing clips, the thrust guide of the connection to the flaps, and the seat plates on the dampers levers.
The cause of wear is the material from which the vortex dampers drive system itself is made - plastic.
Over time, the connection points of the linkage and the flaps wear out, this leads to a malfunctioning system of the vortex dampers of the manifold of the Mercedes.
Solve this problem could only be replacing the intake manifold in the face, with the collector cost $ 600-700 per piece, and given the fact that you need to replace both collectors (right and left), this is a very inexpensive solution.
We propose a way out of this situation - a repair kit for the traction of the vortex dampers of the Mercedes (the thrust of the vortex dampers of the Mercedes is made of aluminum, and this significantly extends their service life). Thanks to repair kit you completely solve this problem, the functioning of the vortex dampers system is restored, besides it is a great saving of your budget and time!
Jeep Grand Cherokee WK / WH
Jeep Commander XK / XH
Mercedes-Benz C320 / C350 CDI
Mercedes-Benz E280 / E320 CDI/BlueTEC
Mercedes-Benz R320 / R350 CDI/BlueTEC
Mercedes-Benz ML320 / ML350 CDI/BlueTEC
Mercedes-Benz GL320 / GL350 CDI/BlueTEC
Mercedes-Benz S320 / S350 CDI/BlueTEC
Mercedes-Benz CLS320 / CLS350 CDI/BlueTEC
Chrysler 300C
OEM numbers:
A6420905037
A6420907737
A6420905437
A6420903237
6420903237
6420905037
6420905437
6420907737
A 642 090 50 37
A 642 090 77 37
A 642 090 32 37
A 642 090 54 37
Replacement instructions:
Replacement parts repair kit is not a complicated procedure, but it should be done in stages and thoroughly accurately, because all the elements included in the kit are created with high accuracy.
1. Thorough cleaning of the seats of spacer adapters (rinse with gasoline, using a needle to completely clean all deposits).
2. Lubrication of seats with a thin layer of a thick lubricant (you need very little lubrication).
3. We put the spacers / adapters (the lubricant keeps the spacers on the levers without letting them fall).
4. Further the installation of traction, it is also recommended not to forget about the thin layer of lubricant.
5. Install new clips.
Please verify the part number on your vehicle before ordering.
All parcels are sent by airmail on the same day or the next (except holidays and weekends).
The parcel is sent by the economical carrier, because for you the delivery is free.
But, as everyone knows, economical delivery can not be fast.
It can take both 7 days and 30 days.
And therefore, please pay attention to this before ordering.
Unfortunately, we can not in any way affect the speed of delivery.
Thank you for understanding.