Magnecor 10mm Spark Plug Wires MAZDA RX8 PN 49435

Description

10mm Magnecor spark plug wires for Mazda RX-8
Spark Plug Wires have a limited life. We normally see deterioration and/or misfiring by at least 60,000 miles. Misfires can be evident using a high quality Timing Light or a diagnostic scope, even when not noticeable during normal driving. New wires should be installed as a normal maintenance item every few years, or at 50-60,000 mile intervals.
These are excellent high performance ignition spark plug wires. The construction is top quality and waterproofing is achieved by tight fitting boots over the silicone jacketed cables. They are designed to handle all ranges of ignition systems - from stock to high energy full race. Suppression levels are high enough to not foul radios or on-board computers. Cables have service temperatures of 600 degrees (8.5mm) and 700 degrees (10mm). Spark Plug boots can tolerate 600 degrees. Color choice is red. The 10mm wires have the added protection of thicker silicone jacketing, in addition to looking great on any engine.
Magnecor can provide technically advanced custom-tailored spark plug wires to eliminate the difficulty and risk of attempting to make special wires for your engine yourself, usually for less than the cost of a universal set (if available) and the parts and tools required.
Obviously, if the ignition system is being upgraded, it makes no sense using factory wires that were never designed for the additional energy an upgraded system will provide.  Engine modifications often need different wire routing.  Even fitting a better coil can require different wire connectors.
Mazdatrix in Signal Hill, California
We have been in business since 1977, Dealing with and Racing Mazda Rotary since 1981, and Rotary ONLY since 1988.
We offer over 4500+ parts.